KOMAX Motor 7.5HP (km6) – Price in Pakistan
PKR 163,000
KOMAX Motor 7.5HP KM6 – Price in Pakistan
The KOMAX Motor 7.5HP KM6 is a locally manufactured, heavy-duty submersible motor built for tube wells, agricultural irrigation and deep-bore water pumping.
It delivers 5.5kW power and operates on a 380–415V three-phase supply at 50Hz. Its water-cooled, rewindable design makes it a practical choice for customers who want reliable performance with the possibility of future repair and maintenance instead of replacing the complete motor.
⚙️ Technical Details
| Specification | KOMAX KM6 7.5HP |
|---|---|
| Motor Power | 7.5HP |
| Rated Power | 5.5kW |
| Series | KM6 |
| Bore Size | 6-inch |
| Voltage | 380–415V |
| Frequency | 50Hz |
| Phase | Three-phase |
| Rated Speed | Approximately 2865 RPM |
| Full-Load Current | Approximately 13.2A |
| Cooling Type | Water-cooled |
| Motor Design | Rewindable submersible motor |
| Protection | IP68 |
These figures are based on the manufacturer’s KM6 catalogue and should be matched with the motor nameplate supplied with the product.
💧 Where Can You Use It?
The KOMAX 7.5HP motor is suitable for:
- Agricultural tube wells
- Farm and orchard irrigation
- Deep-bore water pumping
- Dairy and poultry farms
- Water-tank and reservoir filling
- Commercial water supply
- Drip and sprinkler irrigation
- Solar-powered pumping systems
- Water transfer through pipelines
🌟 What Makes It a Good Investment?
Made for Pakistani pumping conditions
The KM6 series is designed for deep-well applications and is manufactured in Pakistan, making product knowledge, technical assistance and maintenance support more accessible.
Water-cooled operation
Internal water cooling helps control operating temperature when the motor is installed and operated according to the manufacturer’s requirements.
Rewindable construction
Unlike sealed disposable motors, the rewindable design allows qualified technicians to repair the winding when required.
Designed for sandy wells
The KM6 construction includes a silicon-carbide mechanical seal, oil seal and seal-protection system intended to reduce the entry of fine sand around critical sealing components.
Suitable for VFD and solar systems
The manufacturer states that the improved KM6 range is designed for compatibility with VFD outputs, making it relevant for professionally designed solar water-pumping systems.
✅ Best Choice When
- You need a motor for a 6-inch borehole
- A 7.5HP pump matches your required head and discharge
- You have three-phase electricity
- You are planning a solar tube-well system
- Repairability matters to you
- You need water for agricultural or commercial use
❌ Choose Another Capacity When
- Your requirement is only for a small domestic bore
- You need exceptionally high water discharge
- Your pumping head exceeds the matched pump’s range
- Only single-phase electricity is available
- Your pump requires more than 7.5HP
🔄 Motor and Pump Must Be Matched Together
The motor creates the power, but the pump determines the water discharge and pressure.
Before ordering, check:
- Bore depth
- Static water level
- Pumping water level
- Required water quantity
- Delivery height
- Pipeline length
- Pipe diameter
- Pump model and number of stages
A 7.5HP motor can operate different pump combinations, and each combination will produce a different flow and head.
☀️ Can the KOMAX 7.5HP Motor Run on Solar?
Yes. The KM6 series can be used with a compatible solar pump VFD.
A complete solar setup normally requires:
- Correctly sized solar panels
- Compatible solar pump VFD
- DC isolator and protection
- Surge-protection devices
- Proper motor cable
- Earthing system
- Dry-run protection
- Water-level sensors
The solar-panel quantity should be calculated from the motor current, VFD input range, site temperature and required pumping hours—not from horsepower alone.
💰 KOMAX Motor 7.5HP Price in Pakistan
The KOMAX Motor 7.5HP price in Pakistan may change according to current stock, taxes, warranty, delivery location and market conditions.
The total pumping-system price will also depend on:
- Submersible pump model
- Motor cable length
- Control panel or VFD
- Solar panels
- Protection equipment
- Installation requirements
Contact Irshad & Company for the latest price and stock confirmation.
📦 What to Share Before Ordering
Send these details for accurate selection:
- Bore depth and diameter
- Static and operating water level
- Required water discharge
- Delivery height and pipeline length
- Solar or grid operation
- Installation city
Frequently Asked Questions
Is the KOMAX KM6 7.5HP motor made in Pakistan?
Yes. KOMAX manufactures borehole submersible motors and pumps at its facility in Lahore, Pakistan.
Is it a complete pump set?
This product title refers to the motor. Confirm whether the price includes only the motor or a motor-and-pump combination before purchasing.
Can it fit inside a 6-inch bore?
The KM6 series is designed as a 6-inch NEMA borehole submersible motor. Actual bore clearance and pump compatibility must still be checked before installation.
How much water will it produce?
Water output depends on the connected pump, pumping head, water level, pipe diameter and pipeline losses. A fixed discharge cannot be calculated from 7.5HP alone.
Order KOMAX Motor 7.5HP KM6 in Pakistan
Get the KOMAX Motor 7.5HP KM6 from Irshad & Company with assistance in pump matching, cable selection, solar VFD sizing and system protection.
Share your bore details and required water flow to receive the latest quotation and the correct pump-and-motor recommendation.
Reviews
Clear filtersThere are no reviews yet.